PR広告

  

Posted by at

2021年01月08日

Why My iPad Home Button Was Falling in After Repaired?

This time we received a repair case that our customer’s iPad Air Pro home button collapsed in the display hole after repair. Although they tore down the iPad screen and readjusted the home button times, it wasn’t solid as it was before. He was frustrated because he thought there must be a small part he had been missing inside, a small bracket or something he didn’t install when assembled the iPad. That’s why he came to us. Well, this is not a big deal.


First of all, we need to know why the iPad or iPhone home button is sunken after the screen and digitizer reassembled. The iPad home button is fixing with a spacer on the digitizer hole. It has a long flex cable ribbon, which is closely adhered beneath the digitizer. When the home button is off from the screen and digitizer, the adhesive glue will be off and so as the spacer. If we don’t apply enough adhesive glue to the home screen and the spacer, the home button will be falling in after iPad Pro 10.5 LCD screen and digitizer assembled. On the other hand, the new replaced home button must be the exact same size as the hole on the digitizer. Some of the third-party manufactured home button or the iPad screen and digitizer may have errors with the standard size. This will also cause the problem of the home button collapsed.


Next, let’s show you how to install the iPad home button onto the digitizer screen in steps. Before we install the home button, we need to clear the remaining glue from the digitizer. Apply some T7000 adhesive glue on the position of the flex cable ribbon and past the flex ribbon closely on the digitizer. Push the iPad Pro home button with flex cable ribbon on the back slightly to make sure it is flush on the screen. When the home button is fixing tightly on the screen digitizer, we will need to paste the spacer for fixing the home button. We use 10mm Tesa tape to paste on the spacer, make sure the tape is fully covered on the spacer touching face. Paste the spacer across the home button. Press the spacer slightly and make sure it is tightly fixing on the home button. We can check the home button now by gently pressing on the digitizer screen, to see if it is sunken in the hole. We can readjust the position if it is falling in. Apply a little more glue around the home button and the spacer to make sure it is fastened well on the digitizer. After these steps are finished, we can assemble the screen digitizer onto the iPad screen.


Finally, we advise our customers to tear down their iPad screen and digitizer and reassemble the home button. Follow our steps above to avoid the problem. Furthermore, we suggest our customers choose the original new iPad digitizer touch screen assembly with adhesive or the home button because some third-party manufactured iPad or iPhone parts may have errors with the original device. For consideration of this issue from our customers, Etrade Supply provides the best LCD iPad screen and digitizer. All our iPad parts are 100% tested before stock-in. Customers have no worries about the home button size errors, we guarantee.




  


Posted by phoneparts at 14:00Comments(0)iPad

2020年12月26日

How to Fix the iPad LCD Screen Backlight dim Issue

This is a problem our customers complain about most in our shop. Some new replaced LCD screens are dim when we turn on the iPad. The same problem has happened on iPhone screens before, and we consume the issue to be the backlight circuit problem. How could this happen to the LCD screens? Can this problem be fixed? Here we would like to discuss it with you here.


Firstly, we have to know something about an iPad or iPhone LCD screen’s composition. The LCD screen is totally consists of eight layers, but only the three layers related closely to the image forming and animation on the screen. The backlight is one of these three layers. It is an LED light panel that allows the phone screen to be seen in the dark. When this light panel fails for lighting up, you will see a very dark screen and dim images, which can only seem under strong light. The reasons why this happened are complicated. For one side, some of the low-quality LCD screens are manufactured from third-party factories. These high copy screens are not matched with the original screens on the electrical characteristics. The high copy screen requires much more electric power loss than the original screen. When the backlight circuit is overloaded, it would be damaged and not work. On the other side, damages to the iPhone or iPad screens may cause the iPad screen backlight panel to fail for lighting up after iPad LCD screen replacement.


Next, fixing the backlight circuit issue can be difficult and risky. It requires someone professional on Apple mobile device repair experience on it. Since the backlight failed for lightening could be more than one reason, the repair solutions consist of a simple filter replacement, another can require replacing the whole circuit or adding jumper wires to bypass damaged tracks. Specifics of the operation may refer to YouTube videos or google. We advise you not to try without professional guidance because these solutions are risky. Inexperienced operations may cause irreversible damages to the new screen. You may check our iPad repair guidance about iPad mini 4 screen replacement video if you have interests.


Finally, we sincerely advise our iPad and iPhone users don’t trust any “parts swapping fixing everything” from a third-party repair shop. Choose the original new LCD screens or high-quality level screens for replacement if you have to swap the original screens. All in all, we should take action for our iPad screen protection or else it will cost us a lot on repair. Besides, you may come to Etrade Supply online store for our new iPad swappable screen. Here we got iPad mini 4 LCD screen and digitizer and small parts as well. You are free to contact us if you find any replacement parts you have interests. We are glad here for help.

  


Posted by phoneparts at 16:05Comments(0)iPad

2020年12月18日

Process of iPad Pro 10.5 Charging Port Replacement

The iPad Pro 10.5’s charging port part is consists of the charging port and the flex ribbon with connector. When your iPad is damaged on the charging port and cannot be charging, you may consider replacing the charging port inside. Here Etrade Supply would like to show you how to tear down the iPad Pro 10.5 to replace the charging port module. Check the process below.


Firstly, we need to tear down the iPad screen. Power off the iPad, then place it onto the separation heating station for heating the screen with 65℃ in 2-3 minutes. Use suction cup and ultra-thin plastic plectrum to slice and separate the screen from the iPad. Unbolt the screws and take off the metal shield for fixing the iPad 10.5 battery connector, then unplug the battery cable with spudger. Unbolt the screws and take off the metal panel for fixing the screen flex cables. Disconnect the screen cables so that the screen can be separated entirely. Here we can see the charging port on the bottom of the iPad. Unbolt the two screws for fixing the charging port, then use a hot air gun to blow on the charging port cable for a while. Use a metal prying tool to pry and take off the charging port module slowly for the iPad. Place the new one into the iPad and plug the cable. Fixing it with the two screws back, make sure it is closely assembled. Connect the screen flex cable back and fixing the cables with a metal panel and screws. Connect the battery cable. Assemble the screen back and make sure it is strictly assembled with the iPad frame. Turn on the iPad and test the new replaced iPad 10.5 charging port. Charging the iPad to see if it is normal to finish the repair process.


As the final suggestion, we should not tear down our iPad by ourselves if we don’t know anything about iPad repair. Go to the Apple authority service center if you face this problem. The iPad screen is easy to be broken, just be careful with it. Anyway, you may also check some iPad 10.5 parts like iPad 10.5 LCD screen and small parts in our shop if you are interested. Leave your comments if you have questions about iPad repair, we are glad to discuss with you.


  


Posted by phoneparts at 14:40Comments(0)iPad

2020年09月18日

How to Replace the iPad Air 3 Headphone

The iPad Air 3 earphone is a swappable part on the up left side. To replace the earphone, we need to tear down the display screen. Also, the iPad headphone has a long flex cable ribbon which is adhesive on the panel. Here we would like to show you steps on how to replace the iPad Air 3 headphone.



1. Tear down the iPad Air 3 display screen

Firstly, we need to power off the iPad. Use 80℃ hot air gun to blow around the edge and four corners for 1-2 mins. Use hard plastic plectrum and metal prying tool to slice around and separate the display. Gently pry and flip up when the iPad display is separated. Unbolt the two screws and take off the metal shield with tweezers. Disconnect the display flex cables and take the display screen away after it is separated completely. Snap off the four screws and remove the metal shield for fixing the internal parts. Here we can see the earphone on the up left side of the iPad.



2. Take off the iPad Air 3 headphone and replace the new one

Disconnect the headphone jack flex. Loosen the screws for fixing the earphone. Use the metal prying tool to pry and separate the earphone flex cable ribbon. Take off the iPad Air 3 earphone with flex cable ribbon from the iPad after it is totally separated. Install the new earphone into the original place and fix it with the screws back. Connect the earphone flex cable to the iPad. Gently press on the flex cable ribbon to make it adhesively paste on the panel. Place the metal shield back and fixing it with the screws.



3. Reassemble the display and test the headphone function

Reverse the teardown step orders. Connect the iPad Air 3 LCD display screen flex cables back and place the metal shield back. Tighten the screws for fixing the flex cables. Assemble the display screen back but past the frame adhesive glue beforehand. Place the display back to the original position, slightly press on the edge, and each corner to make sure it is strictly sealed. Turn on the iPad to test the earphone, check if it is working normally.



As a final notice, the iPad LCD displays screen is easy to break which needs our extra carefulness while tearing down. Don’t try to do it yourself on your iPad at home if you are not familiar with the iPad repair procedure. You may also come to Etrade Supply if you are looking for iPad Air parts for replacement. Contact us if you have any problems with our product or iPad repair, we are glad here to help you.




  


Posted by phoneparts at 11:05Comments(0)iPad

2019年10月25日

Replace iPad Pro 10.5” Touch Screen and Digitizer Assembly

Tools required:

Phillips screwdriver

Hard plastic triangle plectrum

Spudger

Tweezers

Steel pry tool

Hot air gun


Step 1: Tear down and separate the iPad Pro 10.5 touch screen and digitizer assembly

1.1 Turn off the iPad, hot air gun blowing on the screen edge to soften the frame adhesive glue, then use a thin steel pry tool to make a gap between the screen and the frame

1.2 Use hard plastic triangle plectrum to slice around the gap slowly, you may need three or more plectrums here

1.3 When the display screen is separated, slowly pry up it from the frame on the top side

1.4 Hold the screen with a hand, loosen the two screws on the metal bracket, and then remove the metal bracket which covered on the flex cables with tweezers

1.5 Disconnect the four flex cables when the bracket is away, and then you may take down the display screen assembly

Step 2: Replace iPad Pro 10.5 LCD touch screen and digitizer assembly

2.1 Take down the home button from the old display screen

2.11 Tear up the small piece of black tape on the home button with tweezers

2.12 Release the connector by slicing out the flex cable with spudger

2.13 Disconnect the two adhesive gobs with spudger which is for holding the home button and touch ID, pry it up from the front panel. Be careful and don’t damage the flex

2.14 Remove the home button and the touch ID assembly from the screen with spudger

2.2 Install the home button and Touch ID assembly on the new screen, connect the bracket back to fix the home button

2.3 Connect back the home button flex cable with tweezers and paste the small piece of black adhesive back

Step 3: Reinstall the iPad Pro 10.5 screen and reassemble the device

3.1 Attach a new black adhesive frame sticker around the new iPad screen and digitizer assembly

3.2 Connect the four screen flex cables back

3.3 Cover the metal bracket back for fixing the flex cables and screw back the two Phillips screws

3.4 Gently and slowly attach the display screen on the frame, slightly press each corner and the edge, and make sure there are no gaps

3.5 Turn on the device and check the new-replaced screen about the touch sensitiveness and App response. All process is done!


Note: the whole process will be a little complicated for someone who not familiar with mobile device repair. We suggest you go to the Apple authorized service center or the repair shop if you are not confident about yourself. Just be patient and careful if you are taking the process on it.


You may also be looking for:


For iPad Pro 10.5 LCD screen and digitizer assembly replacement

For iPad Pro 10.5 home button and Touch ID assembly replacement

iPad 10.5 Pro glass screen protector

iPad repair tool kit


How to Replace iPad Pro 10.5” Touch Screen and Digitizer Assembly  


Posted by phoneparts at 09:35Comments(0)iPad

2019年10月23日

9 Features You Should Know About iPadOS

The iPadOS launched in October this year. This new operating system is special developed for iPad. Just as the same features of iOS 13 to iPhone, the iPadOS provides us nine useful features to us, which might not be known for everybody. Let’s see what these features are.

1. Quick screenshots: Use iPad pencil to scrap from the left corner to center on the screen, you could make a quick screenshot.

2. Floating keyboard: Pinch in or long-press on the keyboard dismiss button to select the floating option, you can activate the floating keyboard. You can drag the floating keyboard anywhere around the iPad screen. Quick-path typing is also working on floating keyboard.

3. Overhauled home screen: Swipe over to the right and on the widget, select "Add to Home Screen." You can fit more icons on the ‌iPad‌'s Home screen, and the Today view widget can now be permanently positioned on the Home screen when the ‌iPad‌ is in landscape mode. You can also get to the option from the Edit interface of the widget, and if you pin favorites, those widgets will always display first.

4. New gesture: You can swipe up and down to view the website page as fast as you want, and move the cursor anywhere in the text paragraph freely. Double-tap is for sentence selecting, triple taps for paragraph selecting. Pinch-in is for copy and pinch-out is for paste. Three fingers swipe for undo or redo.

5. Slide over for improvement: You can drag apps into Slide Over on the left or the right side of the screen, and you can open multiple Slide Over apps. Swap between them with a swipe, and swipe up and hold to get to an interface where you can see all of your open Slide Over apps and close the ones you don't need.

6. Multiple windows: You can use two windows reparative on the screen to work or transferring documents.

7. Multitasking notifications: When the new message-in window pup-up on the screen, you can drag it to the right to open it as a reparative window side by side

8. App expose: Long press on the App and select Show All Windows, you will see all the open windows.

9. Mouse support: The iPadOS have Bluetooth mouse connection support. Go to Settings >> Accessibility >> Touch >> Turn on “Assistive Touch”


These are the 9 features about iPadOS. You will find it a handful if you have installed this new system on your iPad. Furthermore, we suggest you learn something about iPad maintenance if you are using an iPad now. You may also check some iPad parts in our store, such as for iPad 10.2 LCD screen and digitizer assembly with flex cable replacement here. Any questions about iPad parts, please feel free to contact us.
9 features about iPadOS
  


Posted by phoneparts at 17:05Comments(0)iPad

2019年08月21日

16 Helpful Keyboard Shortcuts for Pages on iPad

The Apple iPad supports external keyboard connection for typing. If you get accustomed to the iPad and physical keyboard, you will have to know some keyboard shortcuts so that you could make your work efficient and quick. Here we make a brief on 16 useful keyboard shortcuts, and we hope these tricks would be useful to your further work.


Here are 16 Pages Keyboard Shortcuts for iPad:


Create New Document – Command N

Open Document / Go to Documents – Command O

Find – Command F

Show / Hide Word Count – Shift Command W

Show / Hide Ruler – Command R

Add Comment – Shift Command K

Increase/decrease font size – Command +/–

Bold – Command B

Italic – Command I

Underline – Command U

Copy Style – Option Command C

Copy – Command C

Paste – Command V

Cut – Command X

Navigate Document – Arrow Keys

Close Pages and return to Home Screen – Command H


Most of the keyboard shortcuts shown above are identical on the Mac, so if you use Pages on iPad and Mac you’ll find them quite applicable. No matter you are using keyboard case, Bluetooth keyboard, or other external keyboards for connection, these shortcuts will be helpful to your work. On the other hand, we suggest you learn some iPad maintenance knowledge, iPad repair and iPad replacement parts as well. If you have any other tips and tricks about iPad, please leave your commands below. We are glad to talk about it with you.


iPad keyboard shortcut  


Posted by phoneparts at 16:40Comments(0)iPad