PR広告

  

Posted by at

2020年11月06日

Full Process Presentation on Samsung Galaxy S20 Teardown

The Samsung S20 internal structure mainly contains a display screen, middle frame and some small parts. To tear down the Samsung S20, we need to be careful and patient. The first step we would do is take off the battery door, and then off the wireless charging coil. After that we may take off the inside parts which are install on the middle frame. We can disassemble the display screen with middle frame at last and finish the process. Let’s see the details presented below:



1. Tear down the battery door and wireless charging port

Power off the phone, eject and take out the SIM card tray. Use hot air gun to blow on the back battery door around the edge. Use suction cup to pull and ultra-thin plastic sheet to slice and separate the battery door. Take off the batter door and then we can see the wireless charging coil on the top. Unbolt the 15 Phillips screws for fixing the charging coil, then we are able to pry and take off the wireless charging coil with steel pry tool from the Samsung phone.


2. Take off the camera module and other small parts

After the charging coil is removed, we can see the flex cable ribbons. Disconnect the battery flex cable firstly. Pry and remove the antenna bracket with spudger on the upside of the phone. After that, we can remove the speaker bracket on the bottom in the same way. Pry and take off the SUB main flex ribbon and antenna flex for connecting the charging port board and mainboard. Unplug the display flex cable. Loosen the screws for fixing the mainboard, and disconnect the front facing camera flex cable. Use spudger to pry and take off the mainboard from the phone. The rear-facing camera module is combined on the mainboard, we can separate the rear cameras form the board. Unbolt the three Phillips screws and take off the Samsung S20 charging port PCB board with spudger. Hot air gun blows and gently pry off the ear speaker from the middle frame.


3. Tear down the battery from the middle frame

After the small parts are taken off from the display, here we can tear down the battery and separate the display screen. Add some battery sticker melted glue and pry the battery off from the middle frame with steel prying tool. Hot air gun blow on the display screen and use ultra-thin sheet to slice and separate the Samsung S20 display screen and digitizer from the frame. All teardown process for Samsung S20 is over.



The whole teardown process will be a little complicated. We suggest you not try if you are not familiar with Samsung S20 repair. The flex ribbons are easy to break, just be care while unplugging. Besides, you may leave comments or email to us if you need any Samsung S20 parts for replacement. Come to Etrade Supply if you are interested in Samsung mobile phone repair.



  


Posted by phoneparts at 12:00Comments(0)Samsung

2020年09月30日

How to Replace the Samsung S20 Charging Port PCB Board

The Samsung Galaxy S20 charging port is combined in a module of PCB board. It can be swappable if the charging port is broken. To replace the charging port PCB board, we have to tear down the back housing, take off the wireless charging port, and the loudspeaker bracket as well. Here are the specific steps Etrade Supply would like to show you blow.


1. Tear down the Samsung S20 back housing and take off the wireless charging coil

Firstly, we need to tear down the back housing. Power off the phone and take out the SIM card tray. Use a hot air gun to blow on the edge and corners of the back housing. Use a suction cup to pull and an ultra-thin plastic panel to slice and separate the back housing. Flip and remove it away after it is separated. Unbolt the eleven screws for fixing the wireless charging coil, disconnect the BTB interface cable. Pry and take off the charging coil with a steel prying tool. Just be careful and don’t break the flex.

2. Take off the bottom loudspeaker bracket and replace the charging port PCB board

Loosen the five screws for fixing the bottom loudspeaker bracket. Take off the bracket slowly. Disconnect the battery flex cable, the SUB mother board flex and the antenna flex with a spudger. Take off the flexes from the phone. Undo the five screws for fixing the Samsung S20 charging port PCB board, then we are able to take off the board. Use the steel prying tool to pry out and take off the charging port PCB board. Install the new PCB board into the phone, fixing it with the five screws.

3. Assemble the Samsung S20 phone and test the new replaced charging port

Connect the SUB mainboard flex and the antenna flex back. Assemble the bottom loudspeaker bracket back, and fix it with the five screws. Connect the battery flex cable after that. Install the wireless charging coil back and fixing it with the eleven screws. Assemble the back housing to the phone. Gently press on the back to seal up the phone. Insert the Samsung S20 SIM card tray back. Turn on the phone and plug the USB charger to check if the charging port is normal.


The whole process above may be a little complicated for a new repair beginner. Besides, we should be careful on slicing and tearing down the back housing because it is easy to be broken. There are many flex cables inside, don’t misconnect the cables. What’s more, Etrade Supply offers new replacement parts for Samsung Galaxy S20 repair. Come to our online store if you are looking for Samsung swappable parts.




Article resources from Etrade Supply Blog of: How to Replace Samsung S20 Charging Port PCB Board  


Posted by phoneparts at 15:35Comments(0)Samsung

2020年06月12日

How to Tear Down and Reassemble Samsung Galaxy A51

The Samsung Galaxy A51 parts mainly consist of a display screen, a middle frame, back panel, mainboard, and SUB board and the inner parts with flexes. Tearing down the phone requires our carefulness and patience during the process. Here we would like to demonstrate to you how to tear down and reassemble this Samsung model in steps, and also some notice during the process. Check this out.


1. Steps of Samsung Galaxy A51 teardown

Firstly, we need to turn off the phone and take out the SIM card tray. Use hot air gun to blow on the edge of the back panel for 2 or 3 minutes and then use the suction cup and ultra-thin plastic sheet to slice and separate the back panel from the frame. After that, we can see the middle frame is fixing by 13 Phillips screws on the phone. Snap off the 13 screws, and remove the middle frame with plastic plectrum carefully. Disconnect the battery flex, and the SUB flex as well. Disconnect the antenna wire port, and then disconnect and remove the front-facing camera. Snap off the screw and remove the mainboard. After that, we can remove the fingerprint sensor and the charging port board. Lastly, remove the battery with steel pry tool careful, but remember to use battery adhesive sticker glue to melt the sticker before removing. Now the phone is completely torn down, let’s move to the next section about how to reassemble it.

2. Steps of Samsung Galaxy A51 reassembly

Just follow the teardown steps back, install the battery first. Don’t forget to past the adhesive sticker on the battery before installation. Place the Samsung A51 charging port board back and adjust the position. Connect the antenna wire port and the display flex cable. Install the fingerprint sensor and connect the flex, tighten the screws for fixing it. Install the mainboard back and fixing it with the screw. Connect the antenna wire port back to the board and install a front-facing camera. Connect the Samsung Galaxy A51 SUB flex and the battery flex cable back. Cover the middle frame, slightly press and make it tightly stick on the display, tighten the 13 screws for fixing the middle frame. Install the back penal, make sure it is in the right position. Slightly press the edge to make it tightly stick with the display.

3. Notice on Samsung A51 teardown procedure

There are things we have to notice during the teardown reassemble procedure. Firstly, the back panel and the middle frame is flexible but easy to be broken, we need to be careful and don’t twist it too much. Next, always remember to disconnect the battery cable in the first place before take down any internal parts, and connect it on the last after all the parts are installed in the reassembly. Furthermore, always remember the position of each inner part when reassembling the phone. Don’t miss any part or screw. The Samsung phone will not be 100% waterproof after teardown, you should be careful about using it after it is repaired.


The whole process above is practiced under the hands of our professional colleague. If you are not familiar with Samsung mobile repair, you will need a longer time to finish all the steps. Anyway, mobile phone repair is complex, which requires our patience and insistence. Furthermore, you may come to our online store if you are looking for any Samsung Galaxy A51 replacement parts. Please contact us if there is anything we can do to help you. You may leave your comments if you have any questions about the procedure above.


  


Posted by phoneparts at 16:00Comments(0)Samsung

2020年06月05日

4 Solutions to Fix Samsung Galaxy Note 9 Camera issues

Sometimes it happens to you Samsung Note 9 that the camera stop working with no reason and the message error appears like “unfortunately, the camera has stopped”. This problem always relates to the software or app crash. Here we would like to share you shortcuts to troubleshoot the issues. Hopeful, the ways we list below could be helpful to solve the problem.

1. Clear the camera app cache and data

Your camera app is overloaded with cache and junk data after a long time using it. You need to erase and clear the cache and data on your phone. Take the following steps of measurement and restart your phone afterward. Don’t worry, it won’t affect your phone original data. To do so, just follow the steps below:

Open apps tray on home screen>> open settings >> find apps and tap >> Tap Menu and tap show system apps to see preinstalled apps >> Find camera and tap >> Tap storage and select clear cache >> Tap clear data option and confirm the delete


2. Updating the latest android version and the camera app

This works especially to the third party camera App. You may try this way if you are using the third party camera. Sometimes the android version may affect the issue of the camera, so updating to the latest system version may be effective for fixing the camera issue.

To update the android version, just follow the steps below:

Open Settings >> Scroll down and software updates >> Select download and install >> Find if OTA update is available. If so, update phone will start the download automatically

To update the camera App, just Select apps from home screen >> Select settings >> Find your third party app >> Select and update it


3. Rebooting the phone in safe mode

To reboot the phone safe mode will allow you to disable the third-party apps, and this will crash the camera app and fix the camera issue somehow.

To run safe mode on an Android phone, follow the steps here: Turn off your phone >> Press and hold the power key until you see the phone model on your phone screen >> When appearing Samsung logo, release the power key >> Immediately press and hold the volume down key after releasing the power key until mobile finishes restarting >> On the safe mode screen appearance in the bottom left corner, release the volume down key.

Now try to use the Samsung Note 5 camera by taking pictures or videos. If the issue is not resolved, try our next solution.


4. Resetting your phone

This is the last and ultimate solution to your camera problem. However, before resetting your phone completely, it is recommended to take a backup of your important data and apps.

To reset your phone, follow the steps here: Turn off the phone >> Press and hold the volume up key and Bixby key, then press and hold the power key >> on the display of logo release all keys >> Press volume key several times >> select ‘wipe data/factory reset’ by volume keys and press power key >> select ‘yes—delete all user data’ and press the power key


The four solutions above are fast and effective to fix your Samsung Galaxy Note 9 camera issues. You may try the steps if you happen to face the problems on your phone. If the camera problems still exist after you try, we suggest you go to the repair shop to tear down the phone and check the camera. Besides, you may also go to our shop for some Samsung Galaxy Note 9 LCD display screen if you are considering to replace the camera.


  


Posted by phoneparts at 16:15Comments(0)Samsung

2019年11月28日

How to replace Samsung Galaxy S10 Rear-facing Camera

The Samsung Galaxy S10 has a complex internal structure, which contains lots of parts and elements. Since we have demonstrated how to replace the Samsung S10 LCD display screen previously, here we would like to show you how to replace the Samsung S10 rear-facing camera in steps. Let’s get all the tools ready and take the process on it.


1. Teardown the phone

Use a mobile phone opening tool to separate and take down the back cover. Loosen the Phillips screws and remove the plastic cover with wireless charging coil, and then disconnect the battery flex cable. Loosen the seven screws and remove the loudspeaker. Disconnect the flex cables and then remove the parts, which include a headphone jack and the front-facing camera, disconnect the mainboard flex cable as well. Loosen the three screws on the mainboard, and then eject and take out the SIM card holder.


2. Replace the rear-facing camera

After the mainboard is loosened, make sure all the flex cables are disconnected on the mainboard. It is time to take the mainboard off from the phone for rear-facing camera replacement. Flip over the mainboard and then we can see the rear-facing camera is fixing on the board with two connectors. Gently pry and disconnect the cables and remove the camera from the board, and then install the new camera on it. Make sure no fingerprint, dust or dirt left on the camera lens, then connect the flex cables.


3. Reassemble the phone

After the new Samsung Galaxy S10 rear-facing camera replacement is completed, then let’s move to the final step of the Samsung S10 reassemble. Firstly, install the mainboard back and make sure it is on the position as it used to be. Insert the SIM card holder back and then fixing the mainboard with the three screws. Install the front-facing camera and the headphone jack back on the board, then connect the mainboard flex cable. Place the loudspeaker back and fixing it with the seven screws. Connect the battery flex cable back and then place the plastic cover back. Fixing the cover with eight screws. Turn on the phone and test the new camera, make sure it is working ok. Then attach a new back cover adhesive on the back cover and seal up the cover.


The whole process may be a little complicated for us, but we have to be careful. Don’t damage the internal parts and the flexes, and don’t lose the tiny screws. For more details about the Samsung S10 rear-facing camera replacement, please go to our website blog or leave your comments if you have any questions.


How to Replace Samsung Galaxy S10 Rear-facing camera  


Posted by phoneparts at 11:15Comments(0)Samsung

2019年09月05日

How to Teardown Samsung Galaxy A80?


Samsung Galaxy A80 is a great smartphone model
in this year. The most impressive for this mobile model might be its pop-up
rotating cameras. Since this Samsung model has been released in the global
market, you might be interested in what’s the internal structure inside this
smartphone as well. Here we make a specification about Samsung Galaxy A80
teardown, hope you will learn more about this Samsung A80 from our
demonstration below.



 



1.      Power off the phone, take out
the SIM card with the SIM card eject out tool



2.      Separate the back housing with
a plastic triangle opening tool and thin plastic sheet



3.      Twist off the 14 Philips screws



4.      Remove the top cover



5.      Disconnect the battery cable, the
signal wire ports, the mainboard cable which connects with the speaker assembly
and charger port



6.      Remove the two black plastic
covers on both sides



7.      Twist off the six Philips
screws so that we could remove the camera assembly



8.      Snap off the five Philips
screws and remove the mainboard



9.      Disconnect the camera cables and
separate the mainboard, so that we can take the process of the rotating cameras
teardown



10.   Remove the bottom cover



11.   Disconnect the mainboard cable,
the fingerprint reader cable, the screen cable, and the two signal wire cables



12.   Twist off this Philips screw,
lift and remove the charger port module



13.   Snap off the two screws and
take out the fingerprint reader



14.   Remove the plastic tab, and the
squirt thermal pad and the vibrator motor as well







Since the
rest of the parts are closely connected, there is no point to go on further
disassembly about this device. Teardown of the screen and frame refers to our
previous article of Samsung S7 LCD screen replacement in our blog. Anyway, we
should make catalogs on the parts and screws so that they won’t be in a mess or
lost. You may go to see more about our Samsung
Galaxy Note 9 replacement parts
if you are interested.  



Samsung Galaxy A80 teardown






Article
is quoted from Etrade Supply blog of How
to teardown Samsung Galaxy A80 and reassembly

  


Posted by phoneparts at 14:20Comments(0)Samsung

2019年08月22日

10 Amazing Features About Samsung Galaxy Note 10

Samsung Galaxy Note 10 and 10+ arrive in August this year. The silvery-white shell with rainbow reflection makes this smartphone model a great look. Just as the early leaks about this new Samsung model, Samsung Galaxy Note 10 will be the significance of Samsung mobile technology progress. What will this mobile phone really like? Will it be the best choice for us in 2019 smartphones? Let’s make a brief on the 10 features about Samsung Galaxy Note 10 and 10 Plus.

1. Uni-body S Pen: a magic wand for gesture remote control to screen

2. Live-focusing in video recording: make your video recording in layers

3. Zoom-in Mic: amplify audio you target in your video recording

4. Super-fast charging speed

5. New Dex Mode: make your PC and mobile device connection more convenient

6. UFS 3.0 fast storage: make you data transferring and loading super-fast

7. Wireless power share

8. World’s first EUV processor: superior chipset technology to Snapdragon 855 and Apple’s A12

9. Dural speakers with Dolby Atmos surround sound: make your mobile a surround sound stereo

10. Insane specifications: 8G RAM and 258 storage, 4300 mAh battery, support MicroSD card expand

Do you have your answers to the questions at first we bring up after you see the 10 features of Samsung Galaxy Note 10? We hope these 10 aspects would be your reference when you decide to get this new Samsung model in the flagship store. Besides, we recommend you to learn something about Samsung mobile repair and Samsung Galaxy parts like Samsung Galaxy Note 9 replacement parts in our website. Anything about mobile phone repair will be found here.




Details refer to Etrade Supply blog: www.etradesupply.com/blog  


Posted by phoneparts at 10:45Comments(0)Samsung

2019年08月07日

8 Highlights You Should Not Miss About Samsung Galaxy A80

Samsung released Samsung Galaxy A80 to the global market in July this year. This new smartphone is special for its triple pop-up rotating camera and infinity display screen. What will it be different to us? Here we make a brief about 8 features about Samsung Galaxy A80. Hope these could be the reasons you choose this Samsung phone model.

1. 6.7” Super AMOLED display screen, 1080p*2400P HD+,​ large size infinity display
2. Triple rotating cameras - ​48MP main camera, 8MP ultra-wide camera, and one 12MP TOF 3D camera​​
3. Snapdragon 730 chipset, 8G RAM
4. Sound on Screen
5. 3700 mAh battery, 25 watt super-fast Type C USB charging
6. In-screen fingerprint scanner
7. NFC Feature, Samsung Pay
8. Multi-functional Bixby

These are the 8 aspects of Samsung Galaxy A80 we would like to bring up to you. Does any of these highlights attract you and would be the reason you go to the Samsung flagship store? We all expect more excitements Samsung will bring us. Since there we all like Samsung smartphone, there are reasons we would get to know some Samsung replacement parts, such as Samsung Galaxy S10 display screen replacement. Since the Samsung Galaxy A90 is coming for us at the end of this year, reviews about the newest Samsung model will be coming in days. Let's wait for it.


Samsung Galaxy A80



Article resources from Etrade Supply blog: www.etradesupply.com/blog 

  


Posted by phoneparts at 14:20Comments(0)Samsung

2019年07月24日

Samsung S10 Plus Teardown and Reinstallation Demonstration

​Samsung S10 Plus is a complex mobile phone device. The whole process of teardown and reinstall demonstration would be a little longer than other smartphone models. Let's check this out step by step with patience and resistance.

1. Samsung S10 Plus Teardown:

Before we start the process of Samsung S10 teardown, we should take all the tools ready like the prying tools, screen opening suck-cup, Philip screwdriver. The whole process is complex and a bit difficult, we need to be careful and patient. Some of the internal parts and flex may be easy to break, we should focus on it. Now let’s do it.

1.1 Power off the phone, separate the backplate by prying it off with the pry tool

1.2 Undo the 16 Phillip screws on the backplate, take down the wireless charging pad

1.3 Remove the bottom plastic cover

1.4 Disconnect the battery cable, the string cable, the headphone jack cable, the front-facing camera cable and remove the front-facing camera

1.5 Unscrew the three Phillip screws on the board and remove the headphone jack

1.6 Remove the mainboard by prying up slowly, disconnect the back Samsung S10 Plus rear-facing cameras cable and remove it from the board

1.7 Peel off the protective tape and pry up and remove the copper vapor chamber

1.8 Separate the screen from the frame with a triangle prying tool

1.9 Tear off the protective adhesive tape and pry up the screen flex cable, don’t break the screen fingerprint scanner flex

1.10 Pry off the battery from the frame and then the vibrator motor and earpiece speaker as well

2. Samsung S10 Plus Restall:

The restore process is easier than teardown, we just follow the above step order back and reinstall the parts. On the other hand, we have to keep in mind the right place each part it used to be and don’t mess up the order. Here we go.

2.1 Put the headphone sticker and the vibrator motor back in the frame, as well as the battery

2.2 Insert the cable back to the slot, reseal the screen back to the frame and adjust the right position

2.3 Place the copper vapor chamber back

2.4 Put the front cameras back to the mainboard and connect the cable

2.5 Place the mainboard back and screw the three Phillip screws

2.6 Connect the headphone jack and the screen flex back to the mainboard, install the front-facing cameras back

2.7 Restore the speaker assembly and connect the battery cable back to the mainboard

2.8 Put the plastic cover with wireless charging pot back, screw the 16 Philip screws back

2.9 Seal up the backplate back, better cover with new adhesive on the edge by hot gun blowing

The demonstration steps might be a little complicated, but we have learned much about Samsung S10 Plus model from this article. On the other hand, you will know much about Samsung S10 Plus internal parts and repair technology if you are clear about all these steps. As a mobile phone parts supplier, we suggest you take attention on the parts like Samsung Galaxy S10 Plus LCD Screen and Digitizer Assembly or Samsung Galaxy S10 Plus Rear Face Camera if you are running a repair shop. Any new idea about Samsung S10 repair or questions the above steps, please leave your comment below.

Samsung S10 Plus teardown  
タグ :SamsungS10


Posted by phoneparts at 11:00Comments(0)Samsung

2017年12月27日

5分以内にiPhone 8の背面ハウジングを組み立てるにはどうすればいいですか?

このビデオでは、EtradeSupplyが5分後にiPhone 8の背面ハウジングを組み立てる方法を示します。このビデオがエラーを回避して時間を節約するのに役立つことを願っています。 あなたの時計をありがとう。

  


Posted by phoneparts at 17:18Comments(0)SamsungSmartphone